Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2024-03-12 18:29
117
Company Profile
Zhejiang Jinte New Material Technology Co.,LtdBy certification [File Integrity]
Contact: jinte(Mr.)
Email:
Telephone:
Phone:
Area: Beijing
Address: Beijing
Â
Cheap price: Copper strips are 3.5 times more expensive than aluminum strips , and the proportion of copper is 3.3 times that of aluminum, so aluminum strip for cable are much cheaper than copper strip cable, suitable for low-cost projects or temporary electricity use.
The aluminum strip for cable is very light: the weight of aluminum strips for cable is 40% that of copper strips cable, and the construction and transportation costs are low.
Antioxidant and corrosion-resistant: Aluminum strips for cable reacts quickly with oxygen in the air to form an oxide film, which can prevent further oxidation. Therefore, aluminum strips are a necessary material for high voltage, large cross-section, and large-span overhead transmission, but these advantages of being used for low-voltage lines no longer exist.
Â
Â
Grades | 1050, 1350,1060,1070 |
Temper | O |
Thickness | 0.1mm-4.0mm |
Width | 10mm-1000mm |
Edge | Deburred/Angles chamfers /Round |
Weight Tolerance | -5%--+10% |
Core (ID) | Ø100mm, Ø150mm, Ø300mm or customized |
Standards | EN AW-1350 EN AW-1370 EN14121 or as customer's specification |
Â
Â
Our technical expert have long time experience for aluminum strips slitting and edging.we fitted state of art machines for processing, we have a total solution for strips edging system . aluminum strips edge is excellent to meet the requirements of cable.
Â
Â
â—Giner have powerful raw material sourcing channel.
â—7S management of the total QC control.
â—Huge stock can meet the all kinds of customer's requirement.
â—On time delivery.
â—100% Qualified rate.
Â
Â
1.Aluminum ingots into furnace and by heating to remove impurities;
2.The aluminum liquid into rolling machine into thick plates;
3.The thick plate processing by cold rolling mill ;
4.Natural annealing;
5.Slitting and trimming → Edging → Finished product→Packing.
Â
Â
Once you have selected the appropriate tool for cutting aluminium strips, there are a few tips and tricks to keep in mind:
Use Lubricant: Applying a lubricant, such as WD-40, to the blade or cutting area can help reduce friction and prevent the aluminium from sticking to the blade. This makes the cutting process smoother and helps prevent the blade from overheating.
Â
Smaller Diameter Blades are Better: When using a circular saw or jigsaw, a smaller diameter blade is better for cutting aluminium strips as it will create less friction and generate less heat, resulting in a cleaner and smoother cut.
Â
Clamp: When cutting aluminium strips, it is essential to secure the material firmly in place using clamps or a vise. This helps prevent the material from moving or shifting during the cutting process, which can result in uneven cuts or damaged blades.
Â
Â
Choose the Exterior of Aluminum Strips
The hollow aluminum strip is mainly to separate the hollow glass and play an effective supporting role, so the surface of the aluminium strip needs to be flat without obvious oil stains. Besides, the aluminum strip must be straight and cannot be bent.
Â
Choose the Right Type of Aluminum Strips
Aluminum strips are divided into high-frequency welding aluminum strips and cold drew aluminum strips. Due to the low oxidation resistance of cold-drawn aluminum strips and their unsightly appearance. The cold-drawn aluminum strip is gradually replaced by high-frequency welding aluminum strips. So it is not recommended to buy cold-drawn aluminum strips.
Â
Choose the Right Width of Aluminum Strips
The width of the aluminum strips on the market is between 5.5mm and 26.5mm, and the appropriate specification should be selected according to the size of the insulating glass. In most cases, the specification of x.5 is more commonly used, such as 5.5A, 8.5A, and 11.5A.
Â
Choose the Right Wall Thickness for Aluminum Strips
Wall thickness refers to the thickness of the inner wall of the aluminum strip, which can be divided into bending and non-bending. The thickness of the unbendable aluminum strip is 0.2mm-0.29mm. The thickness of the bendable aluminum strip is 0.3mm-0.35mm. The thicker the aluminum strip, the less the bending loss.
Â
Choose the Right Height for Aluminum Strips
The height of the aluminum strip is fixed between 5.5mm-7mm. The higher the height, the thicker the aluminum strip. The international standard height of aluminum strips is 7mm with an error of +-0.025mm.
Â
Â
Transportation and Storage
Damage to aluminium strips usually occurs during transport and constitutes, for example, scratches and wear marks that can lead to subsequent interfacial corrosion. To prevent such types of damage, it is important that aluminium workpieces be packaged in strong paper, plastic or bubble foil during any moving and transportation to prevent individual surfaces from bumping against each other.
Â
Avoid Water and Moisture
It is important to be aware that water and moisture can cause decorative changes of aluminium surfaces. Moisture damages appear on aluminium strips as white stains or dark discolourations. These damages can among others occur if water or condensation is trapped between stacked aluminium strips, or if the aluminium products are serried.
Â
Air Temperature and Climate
As regards temperature and climate in connection with aluminium strip storage, it is also important to know that aluminium is generally stored at a minimum temperature of +10 degrees Celsius. It should also be mentioned that storage in the open air involves a risk of faster pitting corrosion caused by air pollution from industrial or urban areas. To avoid marks and corrosion, it is generally a good idea to prevent aluminium from coming in contact with other metals during storage.
Â
Q: What is the width of aluminum strips?
Q: How are aluminium strips made?
Q: How do you cut aluminium strips?
Q: What is the density of aluminum strips?
Q: Does aluminum weaken over time?
Q: Can you bend aluminium strip?
Q: Is aluminum strip a conductor or insulator?
Q: Is aluminum strip magnetic?
Q: Does aluminum strip cut easily?
Q: What can damage aluminum strip?
Q: What are the weaknesses of aluminium strip?
Q: Can aluminium strip be bent without breaking?
Q: Does aluminium strip pass electricity?
Q: Can aluminum strip rust?
http://www.gintetech.com/